Skip to content
Digital TV Help

Digital TV Help

DIY TV Antenna Installation, Cabling and More!

  • Home
  • About Me
  • TV Antennas
  • TV Cabling
  • Audio-Visual Help
  • Phone and LAN Cabling
  • Ask a Question
  • Contact

Category: TV Cabling

Belling Lee Socket - The standard TV socket in Australia

How to Identify TV Socket Types

November 21, 2017 David TV Cabling

There are a couple of different TV sockets used in Australia. Choosing the right sockets to use can make a difference to the quality of signal you receive. This guide explains the types available and which to use where.

Continue reading
Completed coaxial TV cable join

How to Rejoin a Cut Coaxial TV Cable

March 5, 2017 David TV Cabling Leave a comment

Here’s what to do when you’ve accidentally cut an RG6 or RG59 coaxial TV cable in your roof or wall.

Continue reading
Tenant's Digital TV Rights

Tenants Digital TV Rights

January 21, 2017 David TV Antennas, TV Cabling Leave a comment

This is a state by state guide to the residential tenancy rules with regard to Digital TV. Problems with Digital

Continue reading
Three level coax strippers

DIY Digital TV Tool Guide

January 15, 2017 David TV Antennas, TV Cabling Leave a comment

This is a guide to the essential tools for doing your own Digital TV antenna or cabling work. In this guide

Continue reading
Finished wallplate and socket for Digital TV

How to Install a Wall Plate TV Socket

January 8, 2017 David TV Cabling Leave a comment

Here’s how to install a socket for Digital TV using a wall plate on a plasterboard wall. In this article

Continue reading
TV Masthead Amplifier

Do I Need a Digital TV Amplifier?

November 30, 2016 David TV Antennas, TV Cabling 2 comments

RF Amplifiers can solve a lot of problems with Digital TV reception. Here’s an easy guide on how to know

Continue reading

Choosing a Digital TV Splitter

June 5, 2016 David TV Cabling Leave a comment

A splitter is used to connect multiple TVs or other devices to a single TV antenna. Using a TV splitter

Continue reading

How to Install a TV Splitter

December 31, 2014 David TV Cabling

Here’s a step by step guide to install an f type splitter or saddle and clamp splitter for Digital TV.

Continue reading
A Compression F Connector on an RG6 Cable

How to Put an F Connector on a Coax Cable

December 21, 2014 David TV Cabling One comment

Here’s a step by step procedure for terminating an RG6 or RG59 coax cable with either a crimp or compression F connector.

Continue reading
What a correctly stripped RG6 cable should look like

How to Strip a Coax Cable

December 6, 2014 David TV Cabling Leave a comment

The first stage of terminating a coax cable is stripping the end. Here’s a step by step procedure with video on how to strip coax cable using two different types of tools.

Continue reading

Posts navigation

1 2 Next Posts»

Search Digital TV Help

Facebook Page

WordPress Theme: Tortuga by ThemeZee.